Rubber Gaskets and Seals are core elastic sealing components. They prevent leakage of liquid, gas and dust, isolate moisture and contaminants between mating surfaces. Available in NBR, EPDM, Silicone, FKM, NR and other rubber materials. Widely used in automotive, hydraulic, petrochemical, water treatment, pump & valve, food machinery, medical devices and HVAC systems for static sealing.
FDA certified food grade silicone gasket. Non-toxic, odorless, high temperature resistant with good rebound. Used for leak-proof sealing of food containers, water bottles, kitchen appliances and beverage machinery. Custom sizes and shapes are supported.
Chemical Resistant Fluorosilicone (FVMQ) Seal is custom molded from fluorosilicone elastomer. It features good resistance to hydrocarbon fuels and mineral oils, combined with wide temperature range, excellent ozone and weather resistance. It is mainly designed for static sealing. Please note it is not suitable for ketones, esters, concentrated acids, strong alkalis and hot steam. We support custom shapes, sizes and hardness per drawings or samples for aerospace, aviation and automotive fuel systems.
fluorosilicone sealwith good fuel and oil resistance, wide temperature range from -60℃ to 200℃. Ideal static sealing part for automotive fuel system and aerospace equipment. Custom molded and die-cut gaskets available.
fluorosilicone gasket with good fuel and oil resistance, wide temperature range from -60℃ to 200℃. Ideal static sealing part for automotive fuel system and aerospace equipment. Custom molded and die-cut gaskets available.
High Temperature Silicone Gasket is compression molded or die-cut from premium high-heat silicone (VMQ) compound. It maintains stable elasticity and sealing performance continuously up to 250℃, short peak temperature up to 280℃, with excellent ozone, UV and weather resistance, good electrical insulation and non-toxic property. It is mainly used for static sealing under high heat conditions. Food-grade and flame retardant formulations are available. We support custom shapes, sizes and hardness according to drawings or samples for ovens, heat exchangers, high-temperature electrical equipment, new energy modules and industrial heating machinery.
Silicone Rubber (VMQ) Gasket is compression molded or die-cut from silicone elastomer. It features an ultra-wide temperature range from -60℃ to +230℃, excellent weather, ozone and UV resistance, good electrical insulation and non-toxic property. FDA food grade and medical grades are available. It is mainly for static sealing. We support custom shapes, sizes and hardness per your drawings or samples for food machinery, medical equipment, new energy, lighting, oven and high-temperature industrial sealing.
Molded Neoprene (CR) Rubber Gasket is compression molded from chloroprene rubber. It features excellent weather and ozone resistance, moderate oil resistance, inherent flame retardancy and good shock absorption. It maintains stable sealing performance under outdoor, coastal and humid conditions. Custom complex shapes, sizes and hardness are available per your drawings or samples for HVAC, marine, construction, automotive and general machinery static sealing.
Elastomer gasket is a precision sealing component compression molded or die-cut from various elastomer compounds including NBR, HNBR, FKM, EPDM, silicone and FFKM. It delivers stable sealing performance against oil, water, ozone, chemicals and high temperature. Suitable for both static and dynamic sealing in harsh industrial conditions. Custom shapes, sizes and hardness are available according to drawings or samples for automotive, hydraulic, oil & gas, HVAC and general machinery applications.
Custom Molded NBR rubber Gasket is compression molded from nitrile butadiene rubber (NBR / Buna-N). It delivers outstanding resistance to mineral oil, lubricants and fuel, with good abrasion resistance and stable mechanical properties. Cost-effective for general industrial sealing. Suitable for static and low-speed dynamic sealing. We support custom shapes, sizes and hardness per your drawings or samples for automotive, hydraulic, pump & valve and general machinery sealing.
Molded Rubber Falt gasket is compression molded from various rubber compounds. It provides reliable static and dynamic sealing against oil, water, heat, ozone and chemicals. We offer material options including NBR, HNBR, FKM/Viton, EPDM, silicone, neoprene and FFKM. Custom shapes, sizes and hardness are available according to drawings or samples for automotive, hydraulic, oil & gas, HVAC and general industrial sealing applications.
Molded Rubber rubber gasket is compression molded from various rubber compounds. It provides reliable static and dynamic sealing against oil, water, heat, ozone and chemicals. We offer material options including NBR, HNBR, FKM/Viton, EPDM, silicone, neoprene and FFKM. Custom shapes, sizes and hardness are available according to drawings or samples for automotive, hydraulic, oil & gas, HVAC and general industrial sealing applications.
Molded Rubber rubber gasket seal is compression molded from various rubber compounds. It provides reliable static and dynamic sealing against oil, water, heat, ozone and chemicals. We offer material options including NBR, HNBR, FKM/Viton, EPDM, silicone, neoprene and FFKM. Custom shapes, sizes and hardness are available according to drawings or samples for automotive, hydraulic, oil & gas, HVAC and general industrial sealing applications.
leave a message
